Efecto de la geometría de la válvula Tesla en el comportamiento del flujo inestable y la caída de presión
un estudio de CFD
DOI:
https://doi.org/10.36561/ING.29.5Palabras clave:
Diodicidad, Caída de presión, Microfluídica/nanofluídica, Válvula Tesla, Dinámica de fluidos computacionalResumen
Simulaciones de dinámica de fluidos computacional (CFD) fueron realizadas para examinar el efecto de los parámetros geométricos de la válvula Tesla en los patrones de flujo, la caída de presión y la diodicidad del flujo. En flujo directo, el flujo es relativamente suave y presenta poca resistencia. Se observan regiones de baja velocidad en la entrada de la sección curva y en la unión de esta con el canal de salida, donde se produce la separación del flujo. En flujo inverso, el flujo es bastante irregular y se observan importantes zonas de recirculación en la rama inferior, además de en las secciones superior curva y de salida. Las simulaciones con pasos de tiempo pequeños muestran que el flujo es estacionario en la dirección directa. Sin embargo, el flujo es mayormente transitorio en la dirección inversa, particularmente a números de Reynolds elevados. El efecto de parámetros geométricos como los ángulos subtendidos por la sección curva (con respecto a la horizontal) muestra que existen valores óptimos para estos ángulos. Para un cierto rango de ángulos, la diodicidad es mayor que 2. Se estudia el efecto de la multietapa de la válvula Tesla y se encuentra que la inestabilidad del flujo y la diodicidad general aumentan con el número de etapas.
Descargas
Citas
Chen, M., & Li, Z. (2025). Conceptional design of passive system-level battery fire prevention device based on Tesla valve channel and phase change material. Journal of Energy Storage, 107, Article e114942.
https://doi.org/10.1016/j.est.2024.114942
Chen, W.H., Zhing, M.H., Nguyen, T.B., Sharma, A.K., & Li, C.G. (2025). Hydrogen production in reverse tesla valve reactor combining ethanol steam reforming and water gas shift reaction. Energy, 318, Article e134783.
https://doi.org/10.1016/j.energy.2025.134783
Chou, C.Y., Kuo, G.C., & Chueh, C.C. (2024). Numerical analysis of thermal-hydraulic influence of geometric flow baffles on multistage Tesla valves in printed circuit heat exchangers. Applied Thermal Engineering, 251, Article e123601. https://doi.org/10.1016/j.applthermaleng.2024.123601
Du, G., Alsenani, T.R., Kumar, J., Alkhalaf, S., Alkhalifah, T., Alturise, F., Almujibah, H., Znaidia, S., & Deifalla, A. (2023) Improving thermal and hydraulic performances through artificial neural networks: An optimization approach for Tesla valve geometrical parameters. Case Studies in Thermal Engineering, 52, Article e103670.
https://doi.org/10.1016/j.csite.2023.103670
Gamboa, A.R., Morris, C.J., & Forster, F.K. (2005) Improvements in Fixed-Valve Micropump Performance Through Shape Optimization of Valves. Journal of Fluids Engineering, 127(2), 339–346.
https://doi.org/10.1115/1.1891151
Hai, T., Rahman, M.A., Aksoy, M., Zhou, J., Alenazi, M.J.F., Singh, N.S.S., Zain, J.M., & Jawawi, D.N.A. (2024). Investigating the performance of the Tesla valve channel in a photovoltaic thermal system through numerical simulation: Evaluation from the standpoint of thermodynamic laws. International Communications in Heat and Mass Transfer, 159, Article e108197. https://doi.org/10.1016/j.icheatmasstransfer.2024.108197.
Han, Q., Liu, Z., Yang, S., Han, J., Wang, Z., Miao, J., & Li, W. (2024). The role of Tesla valves in microchannel flow boiling. International Journal of Heat and Mass Transfer, 234, Article e126148. https://doi.org/10.1016/j.ijheatmasstransfer.2024.126148
Huang, F., Ren, L., Xie, S., Leng, M., & Liao, P (2024). Numerical study of flow characteristics and heat transfer mechanism in Tesla valve tube. Results in Engineering, 21, Article e101795.
https://doi.org/10.1016/j.rineng.2024.101795
Jiang, E., Wang, W., Miao, J., & Zhang, H. (2025). Effect of the Tesla Valve on the heat transfer performance and the suppression of pressure drop oscillation in a liquid cooling loop. International Journal of Thermal Sciences, 207, Article e109356. https://doi.org/10.1016/j.ijthermalsci.2024.109356
Khabarova, D.F, Podzerko, A.V., & Spiridonov, E.K. (2017). Experimental Investigation of Fluidic Diodes. Procedia Engineering. 206, 93–98. https://doi.org/10.1016/j.proeng.2017.10.443
Liu, Z., Shao, W.Q., Sun, Y., & Sun, B.H. (2022). Scaling law of the one-direction flow characteristics of symmetric Tesla valve. Engineering Applications of Computational Fluid Mechanics, 16(1). 441–452.
https://doi.org/10.1080/19942060.2021.2023648
Nobakht, A.Y., Shahsavan, M., & Paykani, A. (2013). Numerical Study of Diodicity Mechanism in Different Tesla-Type Microvalves. Journal of Applied Research and Technology. 11(6), 876–885. https://doi.org/10.1016/S1665-6423(13)71594-3
Purwidyantri, A., & Prabowo, B.A. (2023). Tesla Valve Microfluidics: The Rise of Forgotten Technology. Chemosensors, 11(4), 256–277. https://doi.org/10.3390/ chemosensors11040256)
Tesla, N. (1920). Valvular Conduit (U.S. Patent 1329559A, 3 February 1920) [Google Scholar] Zhang, X., Cao, Z., Fang, K., & Yang, X. (2024). Study on the influence of different structural parameters on the performance of Tesla valve. Journal of Physics, 2707, Article e012092, https://doi.org/10.1088/1742-6596/2707/1/012092
Zhao, Y., Wang, R., Gao, D., Chen, H., & Zhang, H. (2024). Numerical investigation and optimization of a multi-stage Tesla-valve channel based photovoltaic/thermal module. Renewable Energy, 228, Article e120573. https://doi.org/10.1016/j.renene.2024.120573
Zhao, Y.J., Tong, J.B., Zhang, Y.L., Xu X.W., & Tong, L.H. (2024). Hydraulic loss experiment of straight-through Tesla valve in forward and reverse directions. Science Progress, 107(3) Article e39285767 https://doi.org/10.1177/00368504241269433.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2025 Muhammad Shakaib, Muhammad Ehtisharn ul Haq, Syed Muhammad Fakhir Hasani

Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.















