Hacia el almacenamiento de energía sostenible
una solución de IoT de bajo costo para el monitoreo en tiempo real del estado de las baterías de plomo-ácido
DOI:
https://doi.org/10.36561/ING.26.12Palabras clave:
Batería de plomo-ácido, Temperatura, IoT, ESP8266Resumen
Este artículo de investigación presenta un sistema prototipo basado en microcontrolador llamado Sistema de monitoreo del estado de la batería (BHMS), diseñado para evaluar la salud y el estado de las baterías de plomo-ácido. El objetivo del estudio es utilizar el Internet de las cosas (IoT) para monitorear la batería en tiempo real. El sistema incorpora varios sensores para rastrear y registrar parámetros críticos como corriente, voltaje, consumo de energía, estado de carga (SOC), temperatura y estado general de la batería. Estos sensores están configurados para activar una alerta cuando algún parámetro monitoreado cae por debajo de los valores predefinidos. El estudio tiene como objetivo validar la eficacia del sistema de bajo coste propuesto en el seguimiento en tiempo real de baterías de plomo-ácido.
Descargas
Citas
Vangapally, N., Penki, T.R., Elias, Y., Muduli, S., Maddukuri, S., Luski, S., Aurbach, D. and Martha, S.K., “Lead-acid batteries and lead–carbon hybrid systems: A review”, Journal of Power Sources, 579, p.233312, 2023. https://doi.org/10.1016/j.jpowsour.2023.233312
Van der Kuijp, T.J., Huang, L. and Cherry, C.R. “Health hazards of China’s lead-acid battery industry: a review of its market drivers, production processes, and health impacts”, Environmental Health, 12, pp.1-10, 2013. https://doi.org/10.1186/1476-069X-12-61
Kebede, A.A., Coosemans, T., Messagie, M., Jemal, T., Behabtu, H.A., Van Mierlo, J. and Berecibar, M, “Techno-economic analysis of lithium-ion and lead-acid batteries in stationary energy storage application”, Journal of Energy Storage, 40, p.102748, 2021. https://doi.org/10.1016/j.est.2021.102748
Shakir, M., Karim, S., Memon, S., Rehman, S.U. and Mustafa, H, “An improvement in IoT-based smart trash management system using Raspberry Pi”, International Journal of Computational Vision and Robotics, 14(2), pp.191-201, 2024. https://doi.org/10.1504/IJCVR.2024.136997
Rehman, S.U. and Khan, A., “Integrating IoT Technology for Improved Distribution Transformer Monitoring and Protection”, Electrical, Control, and Communication Engineering, 19(1), pp.22-28, 2023. https://doi.org/10.2478/ecce-2023-0004
Mahrous, Y.S., Shenouda, A.Y., Ali, A.A. and Barakat, M.A, “Novel insight into the behavior of carbon in the positive active material of the lead-acid battery”, Diamond and Related Materials, 140, p.110498, 2023. https://doi.org/10.1016/j.diamond.2023.110498
Olabi, A.G., Wilberforce, T., Sayed, E.T., Abo-Khalil, A.G., Maghrabie, H.M., Elsaid, K. and Abdelkareem, M.A., “Battery energy storage systems and SWOT (strengths, weakness, opportunities, and threats) analysis of batteries in power transmission”. Energy, 254, p.123987, 2022. https://doi.org/10.1016/j.energy.2022.123987
Lopes, P.P. and Stamenkovic, V.R, “Past, present, and future of lead-acid batteries”. Science, 369(6506), pp.923-924, 2020. https://doi.org/10.1126/science.abd335
Chang, W.Y., “The state of charge estimating battery methods: A review”. International Scholarly Research Notices, 2013. https://doi.org/10.1155/2013/953792
Kodgirwar, S., Chandrachood, A., Vyas, S. and Kodgirwar, V., “Design of Signal Conditioning Circuit for Biomedical Sensors and Battery Monitoring Circuit for a Portable Communication System”, American Journal Of Engineering Research (AJER), (6), pp.100-107, 2016.
Wahyuddin, M.I., Priambodo, P.S. and Sudibyo, H., “August. State of charge (SoC) analysis and modeling battery discharging parameters”. 4th International Conference on Science and Technology (ICST), pp. 1-5, IEEE, 2018. https://doi.org/10.1109/ICSTC.2018.8528631
Song, Y., Yang, Y. and Hu, Z., “Present status and development trend of batteries for electric vehicles”. Dianwang Jishu/Power System Technology, 35(4), pp.1-7, 2011.
Liu, K., Li, K., Peng, Q. and Zhang, C., “A brief review on key technologies in the battery management system of electric vehicles”. Frontiers of mechanical engineering, 14, pp.47-64, 2019. https://doi.org/10.1007/s11465-018-0516-8
Dinger, A., Martin, R., Mosquet, X., Rabl, M., Rizoulis, D., Russo, M. and Sticher, G., “Batteries for electric cars: Challenges, opportunities, and the outlook to 2020”. The Boston Consulting Group, 7, p.2017, 2010.
Li, J., Zhou, S. and Han, Y. eds., “Advances in battery manufacturing, service, and management systems”. John Wiley & Sons, 2016.
Rehman, S.U., Hussain, A., Hussain, F. and Mannan, M.A., “A comprehensive study: 5G wireless networks and emerging technologies”. International Electrical Engineering Conference (IEEC), Vol. 5, pp. 25-32, 2020.
Rehman, S.U., Ahmad, J., Manzar, A. and Moinuddin, M., “Beamforming techniques for mimo-noma for 5g and beyond 5g: Research gaps and future directions”. Circuits, Systems, and Signal Processing, 43(3), pp.1518-1548, 2024. https://doi.org/10.1007/s00034-023-02517-w
Ur Rehman, S., “Outage probability and ergodic capacity analysis of MIMO-NOMA heterogeneous network for 5G system”. Journal of Independent Studies and Research Computing, 20(2), 2022. https://doi.org/10.31645/JISRC.22.20.2.3
Rehman, S.U., Khan, I., Rehman, N.U. and Hussain, A., “Low-Cost Smart Home Automation System with Advanced Features”. Quaid-E-Awam Univ. Res. J. Eng. Sci. Technol. Nawabshah, 20(01), pp.74-82, 2022. https://doi.org/10.52584/QRJ.2001.10
Rehman, S.U., Raza, M.H. and Khan, A.R., “Delta 3D printer: metal printing”. Journal of Electrical Engineering, Electronics, Control and Computer Science, 5(3), pp.19-24, 2019.
Rumpa, L.D., Ambabunga, Y.A. and Pineng, M., “Optimization of ACS712 Sensor Current Measurement in Solar Power System through Regression Modeling”. Journal of Applied Informatics and Computing, 7(2), pp.198-201, 2023. https://doi.org/10.30871/jaic.v7i2.6511
Indu, A. and Kumar, S.M., “An Approach for Implementing Innovative Weather Monitoring System with DHT11 Sensor and Arduino Uno Tool based on IoT”. Sixth International Conference on I-SMAC (IoT in Social, Mobile, Analytics, and Cloud)(I-SMAC), pp. 274-278, IEEE, 2022. https://doi.org/10.1109/I-SMAC55078.2022.9987289
Publicado
Cómo citar
Número
Sección
